Prof Facade Thinner

Thinner for facade paint Tikkurila PROF facade

Suitable for dilution of facade paint Tikkurila PROF facade

Solventborne

Store and transport in tightly closed containers, protecting against moisture, heat and direct sunlight. Can be storage and transport at low temperatures. Warranty storage period in unopened original package – 5 years.

Unpainted surfaces clean from any dirt, dust and salt. New concrete surfaces can be painted after one heating season, new plastered surfaces - after 1-2 months, new fiber cement slabs - after 6 months. Smooth surfaces must always be treated mechanically by sandblasting or steel brush to create a suitable profile for painting. Grinding or weak concrete surfaces should be removed by sandblasting or hydro-sandblasting machine or steel brush. Remove any flaking, chalky and poorly adhering paint coats from earlier painting surfacea mechanically by sandblasting or steel brush. Possible cracks in the reinforced concrete structure should be uncovered by a scraping or grinding machine with a disk and flange. Clear the exposed metal from rust, protect it with anti-corrosion paint. In case of a fungus or mold infection, treat it with a sanitizing agent, following the appropriate instructions. Wash the surface with detergent, then clean thoroughly with water. Level off the surface defects with the appropriate repair mortar. In case of negative temperature the surfaces should not contain ice and frost.

First coat:

Add Tikkurila PROF facade thinner to the paint in the amount indicated in the label on the facade paint Tikkurila PROF facade. Stir thoroughly for at least 10 minutes at a paint temperature of at least 10°C and hold for 1 hour, in case of negative temperature for 24 hours. Stir again before use.

См. техническую характеристику конкретного материала.