Temanyl GF

A two-component glass flake reinforced vinyl ester acrylic co-polymer heavy duty coating/lining.

  • Very high chemical resistance
  • Excellent mechanical resistance
  • Fast curing
Description

A two-component glass flake reinforced vinyl ester acrylic co-polymer heavy duty coating/lining.


Product Features

• To be used in immersion environments where superior resistance to chemical stress and high temperature is required. Resists crude oil up to +90°C, formic, acetic, lactic, maleic and phthalic acid and sulphuric, phosphoric, nitric and perchloric acid. Resistant to variety of alcohols, ketones and other solvents, wet and dry sulphur dioxide and trioxide fumes, black and white liquor (pulp mill). Temperature resistance +100°C in sea water. Especially developed for long-term, economical protection of storage tanks. • Provides outstanding protection for internal lining for offshore, onshore and buried tanks and pipes subject to extreme chemical exposure and mechanical wear. Instead of a multi-layer system, only 1-2 coats are required but the achieved durability is the same. These properties result in cost-savings throughout the entire lifetime of the coated surface. • Surfaces coated with Temanyl GF can be taken into use 72 hours after application. Less downtime is a remarkable benefit. • Also used in aggressive atmospheric or spillage conditions (secondary containment). • Can be used in flue gas duct (FGD) subjected to service temperature max. +165°C. • Separate chemical resistance list available.


Recommended Uses

• Suitable to be for internal lining for offshore, onshore and buried tanks and pipes subject to extreme chemical exposure and mechanical wear.


Very high chemical resistance

Temanyl GF is used in immersion environments where superior resistance to chemical stress and high temperature is required. The product is especially developed for long-term, economical protection of storage tanks.

Product usp1prof_img
Very high chemical resistance

Excellent mechanical resistance

Temanyl GF provides outstanding protection for internal lining for offshore, onshore and buried tanks and pipes subject to extreme chemical exposure and mechanical wear. Instead of a multi-layer system, only 1-2 coats are required but the achieved durability is the same. These properties result in cost-savings throughout the entire lifetime of the coated surface.

Product usp2prof_img
Excellent mechanical resistance

Fast curing

Surfaces coated with Temanyl GF can be taken into use 72 hours after application. Less downtime is a remarkable benefit.

Product usp3prof_img
Fast curing
English
Hello!

You’re visiting Tikkurila website from United Kingdom. Would you like to visit the local UK site?

has been added to saved.
has been removed from saved.
en