Ässä 4

Water-borne, full-matte and non-reflective acrylate paint for professional use on surfaces that require wear resistance. With Nordic eco-label.

M1_en NordicEcolabel_en

Ässä 4

Water-borne, full-matte and non-reflective acrylate paint for professional use on surfaces that require wear resistance. With Nordic eco-label.

  • 805
  • 5 m²/l
  • 11 m²/l
  • 4 h
  • 0.5 h

Finish

  • Full matt

Description

Water-borne, full-matte and non-reflective acrylate paint for professional use on surfaces that require wear resistance. With Nordic eco-label.


Product Features

Suitable for painting of new and already treated plaster, concrete, filler, chipboard, plasterboard and wood fibreboard surfaces according to instructions.


Recommended Uses

Walls and ceilings in premises where wash resistance and durability are required. E.g. stairwells, utility rooms and public spaces exposed to heavy wear.


Coverage

For absorbing surfaces 8-9 m²/l. For non-absorbing surfaces 10-12 m²/l.


Application Method

brush, spraying


Storage

Must be protected from frost. Store in a dry and cool place, protected from sunlight. Tinted paint or opened container does not withstand long-term storage. Close the can carefully for the next use.


Application Conditions

The surface to be painted must be dry, the temperature at least +5°C and the relative humidity of the air below 80%.


Surface preparation

Unpainted surfaces: Clean the new surfaces by removing any dirt and dust. Fill the surfaces with a suitable Tikkurila Presto or Prestonit filler, if needed, and sand the dried surface. Remove the sanding dust. Prime with Ässä 1 Primer and Ceiling paint. Previously painted surfaces: Wash the surfaces with diluted Maalipesu detergent and rinse carefully with water. Sand the hard, glossy painted surfaces non-glossy. Remove the sanding dust. Fill the cracks and holes with a suitable Tikkurila Presto or Prestonit filler and sand the dried surface. Remove the sanding dust. Prime with Ässä 1 Primer and Ceiling paint, if needed.


Painting

First coat:

Stir Ässä 4 well before use and thin with water, if necessary. Apply 1-2 times with a roller, spray or brush.


Maintenance Painting:

Surfaces painted with Ässä 4 can be maintenance painted with the same or similar water-borne paint. See Pretreatment.


Cleaning of tools

Remove excess paint from tools and wash with water. Tikkurila Pensselipesu is recommended for paint that has hardened to a certain extent.


Maintenance Instructions

If needed, after approx. 1 month from treating the surface, at the earliest. Surfaces are cleaned with a damp cleaning tool moistened in a neutral (pH 6-8) washing solution. Very dirty surfaces are cleaned with a weakly alkaline (pH 8-10) washing solution. The surface may not remain wet after cleaning. Follow the dilution instructions given by the detergent manufacturer when mixing the cleaning solution. The product achieves its final hardness and durability after one month under normal conditions, and therefore the surfaces must be handled with care during this time. If the surfaces need to be cleaned soon after finishing, clean them gently with a damp cleaning cloth.


Full-matt side sheen

Ässä is a full-matt finishing paint that has an almost “dead” sheen. Even its side sheen is full-matt. The flat roller pattern and lack of side sheen enable outstanding results even in the most challenging light conditions.

Product usp1prof_img
Full-matt side sheen

For applications subjected to heavy wear

Ässä 4 meets the requirements of exposure class 04 and is suitable for use in stairwells and public spaces exposed to heavy wear, for example.

Product usp2prof_img
For applications subjected to heavy wear

Designed for professional use

Ässä 4 is designed for professional use. It is also a safe choice – Ässä 4 has received an M1 category for its low emissions as well as the Swan ecolabel.

Product usp3prof_img
Designed for professional use
English
has been added to saved.
has been removed from saved.
en