Finnseco Paksurappauslaasti Hieno 1,2

Fiber-reinforced KS 35/65/500 plaster mortar that can be applied manually or by spraying. Low wetting ability. Maximum grain size: 1.2 mm.

CE

Finnseco Paksurappauslaasti Hieno 1,2

Fiber-reinforced KS 35/65/500 plaster mortar that can be applied manually or by spraying. Low wetting ability. Maximum grain size: 1.2 mm.

  • 24 h
Description

Fiber-reinforced KS 35/65/500 plaster mortar that can be applied manually or by spraying. Low wetting ability. Maximum grain size: 1.2 mm.


Product Features

Used for plastering or troweling the surface of Finnseco Paksurappauslaati. Layer thickness 2-4 mm.


Recommended Uses

Residential, commercial, industrial and storage buildings and others.


Coverage

13-14 l/25 kg.


Application Conditions

The temperature of air, mortar and substrate must be at least +5 °C. Working in hot air, strong winds, direct sunlight, rain or before rain should be avoided.


Surface preparation

Finnseco Thick Render must be allowed to harden properly for at least 2 days (48 h) prior to plastering. The rough-cast render must not be floated smooth. Moisten the substrate as needed. However, when the plastering begins, the substrate must be absorbent. PREPARING THE MORTAR Finnseco Paksurappauslaasti Hieno is added to clean water and mechanically mixed to an even mass, after which it is let to water for about 10 minutes before re-mixing and beginning to work.


Painting

First coat:

Spray the plaster finish with a plaster pump or apply it manually. Different textures can be achieved by varying the consistency of the mix, the nozzle size, amount of air, and the spraying distance. The plaster finish is left on the rough-cast surface or troweled.


English
has been added to saved.
has been removed from saved.
en