Novocryl Pohjuste

Two-component, low viscosity solvent-free acrylic primer.


Novocryl Pohjuste

Two-component, low viscosity solvent-free acrylic primer.


  • Semi-gloss


Two-component, low viscosity solvent-free acrylic primer.

Product Features

Used for Novocryl Massalakka priming and dust binding varnishing. Hardens quickly even at low temperatures. For professional use only.

Recommended Uses

Old and new concrete floors indoors and outdoors.


Spreading rate for concrete floor is approx.: Priming / dust binding 2–3m²/kg / treatment Spreading rate depends on the porosity of the painted surface, smoothness and the varnishing method.

Application Conditions

The relative humidity of the concrete should be less than 97%. During varnishing and drying, the air, the base and the lacquer must be above +5ºC and the relative air humidity less than 80%.

Surface preparation

New concrete surface The concrete adhesive layer is mechanically removed from the surface of the concrete, e.g. by sandblasting or diamond grinding. The best method for removal is chosen according to the space in question. After mechanical cleaning, the cement dust is carefully hoovered or washed off with water. Cement adhesive can also be removed with hydrochloric acid pickling. Pickling is made with diluted hydrochloric acid (1 part strong hydrochloric acid, 4 parts water). The floor is then rinsed with plenty of water and dried well. The base must be dry, hard and solid before surface treatment. Old concrete floor: Remove old, flaky paint film by diamond grinding, milling or sandblasting. Choose the method best suited for the premises. Clean the cavities and potholes in the floor up to healthy, clean concrete. Open cracks, eg with an angle grinder. Remove loose material and dust.

Painting Cleaning of tools

Acetone (thinner 006 1500)


VOC 2004/42/EC (cat A/j) 500g/l (2010) Novocryl Pohjuste: max. VOC < 500g/l

Cures fast

Due to its hardening mechanism, the floor dries quickly and can be loaded as soon as two hours after coating. Thanks to their drying speed, the Novocryl coating systems are particularly suitable for premises where the available working time is limited.

Strenghtens surface

Impregnates new and old concrete floors prior to laying Novocryl coatings and screeds.

Wide temperature range during application

Novocryl products can be applied in low temperatures without significant impact on curing time or surface quality.

has been added to saved.
has been removed from saved.