RustConverter
Not applicable
Water-borne metal primer for rusty areas- RustConverter encapsulates the rust and prevents it from spreading.
RustConverter
Not applicable
Water-borne metal primer for rusty areas- RustConverter encapsulates the rust and prevents it from spreading.
-
858
-
10 m²/l
-
20 m²/l
-
4 h
-
0.5 h
-
Water-borne metal primer for rusty areas- RustConverter encapsulates the rust and prevents it from spreading.
Product Features
Suitable for rusty surfaces of iron and iron alloys. To be used only on rust. Must be coated with Metal Primer WB or Isoxyde.
Recommended Uses
Rusty surfaces.
10 m²/l
Application Method
brush, roller, spraying
The temperature must be between + 8 °C and + 30 °C and relative humidity below 85 %.
Surface preparation
Remove loose rust with a wire brush, scraper or the like, and clean the surface from grease and dirt. It is preferable to use high-pressure and Tikkurila Panssaripesu.
Painting
First coat:
Stir RustConverter before use. Apply with a brush, roller or airless spray (nozzles 19 – 21, 180 - 200 bar). Use unthinned. Often one treatment will suffice, but sometimes several layers are necessary to ensure that the area is totally covered. Always make a test coat to ensure the compatibility of product and surface. RustConverter must be coated with Metal Primer WB or Isoxyde to obtain corrosion protection.
VOC
(cat A/i) 140g/l(2010). RustConverter contains VOC max. 140 g/l.
