Temafloor Primer

A ready-to-use two-component pigmented epoxy varnish.

CE

Temafloor Primer

A ready-to-use two-component pigmented epoxy varnish.

Finish

  • High gloss

Description

A ready-to-use two-component pigmented epoxy varnish.


Product Features

• For priming of new and old concrete floors prior to laying Temafloor coatings and screeds. • Temafloor Primer penetrates well into the pores of the concrete sealing the surface and giving good adhesion for coatings and screeds. • White pigment makes it easy to find cracks and holes on the concrete.


Can Sizes

20,0 L, 4,0 L, 5,0 L


Coverage

Coverage on concrete floors is on the average: 1st primer coat 4–8 m2/l 2nd primer coat 6–10 m2/l Practical coverage depends on the porosity and evenness of the substrate and on the application method.


Application Conditions

The relative humidity of the concrete should not exceed 97%. The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying. Relative humidity of air should not exceed 80%. Note! There is a natural tendency of this coating to chalk, discolor or yellow unevenly. It is recommended to use polyurethane topcoat when there are high aesthetical requirements on color appearance.


Surface preparation

New concrete: Remove laitance by power grinding, vacuum grit blasting or hydrochloric acid etching. Choose the method best suited for the premises. After grinding remove dust carefully with a vacuum cleaner. Hydrochloric acid etching is carried out with diluted hydrochloric acid (1 part concentrated hydrochloric acid, 4 parts water). Rinse with plenty of water. Dry the floor. Old concrete: Remove all grease, oil, chemicals and other impurities by Maalipesu detergent. Remove old peeling paint layer by grinding or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot-holes removing all loose friable material. Open cracks with e.g. an abrasive tool. Remove loose material and dust. If cementitious screed is used, check compatibility with the levelling screed manufacturer.


Painting Cleaning of tools

Thinner 1029.


has been added to saved.
has been removed from saved.