Optiva Matt [5]

The newest generation, matt, waterborne, stain resistant, latex acrylic-composite paint for tinting. Used in the paint modern encapsulation technology increases the barrier properties of painted surface. For decorative painting of walls and ceilings inside residential, office and public use buildings and in schools and health care premises (hospitals, schools, kinder-gardens, hospitals, clinics, offices, operating rooms, treatment rooms, laboratories, dialysis stations, etc.), workhouses and production plants and also food industry without direct food contact.

EXTREME DURABILITY - The highest wet scrub resistance - class 1 (EN 13300) - Homogeneous and easy to obtain final surface - Colour durability in time - Beautiful matt finish - Innovative "Avatint" tinting system ENCAPSULATION TECHNOLOGY - Increased durability of the painted surface to stains and dirt such as: mayonnaise, Maggi spice, chocolate sauce, butter, berries, oil ** - Very good hiding power - Decreased salt effect (lower migration of salts in old buildings, churches, museums, etc.) FRIENDLY FOR HEALTH AND ENVIRONMENT - Ecological formula and highest quality confirmed with International EU Ecolabel certificate - Product doesn’t contain volatile organic compounds (zero % VOC***) - Recommendation from Polish Allergy Association (PTA)**** - Raw materials used in paint production according to European parliament decree REACH, which aim is to assure high level of health and environment protection - Paint fulfil the VOC requirement in BREAM International certificate system*****. - A+ class on account of low emission from the coat according to French standard - Doesn't contain formaldehyde added during production process EASY APPLICATION - Non-dripping formula - Very good adhesion to the surface - Easy paint spreading - Optimal drying time ** it is recommended to remove the stains not later than 15 minutes after getting the dirt on the paint surface. *** according to norm: PN-EN ISO 11890:2. **** recommendation of Polish Allergy Society (PTA) concerns product after the painted surface is fully dry and the room has been thoroughly ventilated. ***** acquaint Yourself with details in Producer Declaration concerning BREEAM International system.

Painting of gypsum boards, gypsum, cement-lime plasters, decorative painting of concrete substrates as well as for renovation of old coatings. Product may be used on small wood and metal surfaces, before application surface should be primed with suitable primer (Tikkurila Everal Primer, Tikkurila Everal Corrostop, Tikkurila Rostex Super Akva).

8-16 m²/l per one coat. The coverage depends a lot on factors such as absorbability, substrate texture, application method and colour. Exact consumption of the paint can be determined only in practise by test painting on the target surface.

Waterborne

spraying, brush, roller

The product must be transported and stored in containers, which protect it against influence of atmospheric conditions. The storage and transport temperature must be between +5°C and +25°C. Protect the paint against frost. Close tightly the packaging immediately after use. Tightly closed packaging should be stored in room with temperature not lower than +5°C and not higher than +25°C, protect from frost and direct sunlight.