Fontecoat EP 50

A two-component water-borne epoxy topcoat and a single-coat paint.

• A semi-gloss epoxy paint to be used as a single-coat paint, primer, intermediate coat or topcoat in epoxy or polyurethane systems for steel surfaces. It dries rapidly and can be applied in thick layers. • An ideal option when a low VOC content is required. The paint has very good resistance against mechanical and chemical stress. The product provides protection comparable to that of solvent-borne epoxy paints. • Can be primed with the solvent-borne adhesion primer Temakeep. The system has extremely good adhesion and surface tolerance. At the same time, it is possible to achieve a very rapid production cycle. • Fast curing and environmentally friendly (low VOC). • Resistant to diesel and biodiesel (RME) fuel. • The product has MED (Marine Equipment Directive) certificate no EUFI29-23001468-MED and is thus accepted for painting surfaces inside the ships.

• Recommended for framework, service platforms, conveyors and other steelwork, machinery and equipment.

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated. Note! The painting work should be performed and supervised according to 12944-7 if not otherwise stated in the respective technical data sheet. Excessive film thickness may result e.g. in cracking, sagging, prolonged drying time, soft film, less chemical resistance, gloss deviation, adhesion and intercoat functionality. In case the product is used otherwise than stated in the standard a written approval from Tikkurila is required.

Waterborne