Fontecoat EP 50 Beige

A two-component water-borne epoxy primer.

• An epoxy primer for steel in highly corrosive environments. Due to its good adhesion to the substrate and the subsequent coat, the primer ensures high mechanical and chemical resistance of the paint system. • Used as an intermediate coat in the NORSOK approved paint system. The approval indicates the paint system's ability to function in off-shore environments. • Can also be recoated with solvent-borne topcoats. The paint can be used in hybrid systems to replace solvent-borne primer and/or intermediate coating. • Used as a primer or an intermediate coat in epoxy / polyurethane systems. • Can also be used as a topcoat or as a single coat paint in epoxy paint systems for steel surfaces. • Resistant to diesel and biodiesel (RME) fuel.

• Recommended for framework, service platforms, conveyors and other steelwork, machinery and equipment.

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated. Note! The painting work should be performed and supervised according to 12944-7 if not otherwise stated in the respective technical data sheet. Excessive film thickness may result e.g. in cracking, sagging, prolonged drying time, soft film, less chemical resistance, gloss deviation, adhesion and intercoat functionality. In case the product is used otherwise than stated in the standard a written approval from Tikkurila is required.

Waterborne