
A two-component high-solids, modified tintable epoxy maintenance paint for demanding surfaces.
A two-component high-solids, modified tintable epoxy maintenance paint for demanding surfaces.
• An ideal solution for maintenance painting due to its very good adhesion even to hand-prepared steel. As a high-solids product, the paint has lower VOC emissions than conventional epoxy paints. • Withstands immersion in water and can therefore be used e.g. on steel structures immersed in water or buried in soil. The product can also be used for painting hydro-power stations. As a CE-marked product, Temabond ST 300 is suitable for concrete surfaces. • The tintable Temabond ST 300 forms a very tight film with good chemical and abrasion resistance. The product is used for repainting and touch-up painting steel surfaces that are difficult to clean, such as bridges, cisterns and different types of steelwork and equipment in the wood-processing and chemical industries. • High film build properties, also by brush. • Can also be applied on old alkyd paint surfaces. • Can be used as a single coat paint. • Winter grade version Temabond WG 300 can be cured at lower temperatures.
• Recommended for repairing of damages caused by transport or installation.
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated. Note! The painting work should be performed and supervised according to 12944-7 if not otherwise stated in the respective technical data sheet. Excessive film thickness may result e.g. in cracking, sagging, prolonged drying time, soft film, less chemical resistance, gloss deviation, adhesion and intercoat functionality. In case the product is used otherwise than stated in the standard a written approval from Tikkurila is required.
Solventborne
Temabond ST 300 is an ideal solution for maintenance painting due to its very good adhesion even to hand-prepared steel. As a high-solids product, the paint has lower VOC emissions than conventional epoxy paints.
Temabond ST 300 withstands immersion in water and can therefore be used e.g. on steel structures immersed in water or buried in soil. The product can also be used for painting hydro-power stations. As a CE-marked product, Temabond ST 300 is suitable for concrete surfaces.
The tintable Temabond ST 300 forms a very tight film with good chemical and abrasion resistance. The product is used for repainting and touch-up painting steel surfaces that are difficult to clean, such as bridges, cisterns and different types of steelwork and equipment in the wood-processing and chemical industries.
You’re visiting Tikkurila website from United Kingdom. Would you like to visit the local UK site?