Temacoat GF-HS Primer

A two-component, high-solids, high performance anti-corrosive epoxy primer.

• Due to superior levelling properties, Temacoat GF-HS Primer forms a smooth and dense substrate for the subsequent paint layer. The product ensures an aesthetically pleasing appearance for epoxy and polyurethane systems, thus enhancing the high quality look of the painted object. • Temacoat GF-HS Primer dries fast supporting efficiency in your operations. The primer can help speed up the painting process and decrease the overall costs of the painting system. Less time for priming is a remarkable benefit. Thanks to special type hardener, the product cures even at sub-zero temperatures. • Using high-solids Temacoat GF-HS Primer instead of traditional epoxies results in lower VOC per litre and reduced impact on the applicator and the environment. Temacoat GF-HS Primer can be applied without thinning on steel and HDG surfaces even with higher dry film thickness. • At higher film thicknesses Temacoat GF-HS hides small surface imperfections and using putty is not necessarily needed. Even and smooth surface requires less sanding.

• Recommended for agricultural and earth moving machinery and other machinery and equipment.

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated. Note! The painting work should be performed and supervised according to ISO 12944-7 if not otherwise stated in the respective technical data sheet. Excessive film thickness may result e.g. in cracking, sagging, prolonged drying time, soft film, less chemical resistance, gloss deviation, adhesion and intercoat functionality. In case the product is used otherwise than stated in the standard a written approval from Tikkurila is required.

Solventborne