Temafloor 200 Primer
High gloss
A two-component solvent-free epoxy varnish.


- For fast priming
- Good primer for patching
Finish
-
High gloss
A two-component solvent-free epoxy varnish.
Product Features
• Thinned Temafloor 200 Primer penetrates well into the pores of the concrete sealing the surface and giving good adhesion for coatings and screeds. • Mixed with sand also suitable for patching of concrete floors.
Recommended Uses
• Suitable for priming of new and old concrete floors prior to laying Temafloor coatings and screeds.
Coverage on concrete floors is on the average: 1st primer coat 4–8 m²/l 2nd primer coat 6–10 m²/l. Practical coverage depends on the porosity and evenness of the substrate and on the application method.
Thinner
Solventfree
The relative humidity of the concrete should not exceed 97%. Residual moisture content should be below 4 weight-%. The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying. Relative humidity of air should not exceed 80%.
Surface preparation
Always remove all grease, oil, and other impurities with Maalipesu detergent before grinding. Remove laitance or old peeling paint layers by power grinding, milling, or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot holes removing all loose or brittle material. Open cracks with e.g. an abrasive tool. After mechanical pre-treatment remove all loose material and dust carefully with a vacuum cleaner. The substrate must have a tensile strength above 1.5 MPa. For application on cementitious leveling screed: check compatibility with the leveling screed manufacturer.
Painting
First coat:
Roller, steel or rubber trowel.
Cleaning of tools
Thinner 006 1029 (or Thinner 006 1031).
VOC
VOC 2004/42/EC (cat A/j) 500 g/l (2010) Temafloor 200 Primer: max. VOC < 500 g/l
For fast priming
Temafloor 200 Primer gives good adhesion for Temafloor coatings and screeds and dries fast. Short overcoating time enables whole system application in one day.

Good primer for patching
Mixed with sand Temafloor 200 Primer is also suitable for patching of concrete floors.

You’re visiting Tikkurila website from United Kingdom. Would you like to visit the local UK site?