Temafloor PU

A solvent-free, elastic two-component polyurethane coating.

  • Solvent-free polyurethane coating
  • Durable coating
  • Reliable and easy to clean


  • High gloss


A solvent-free, elastic two-component polyurethane coating.

Product Features

• For new and old concrete and asphalt floors exposed to mechanical and chemical stress. • Good resistance to abrasion. • Elongation value approx. 60%. • Withstands water, oils, greases, chemicals and dilute solutions of non-oxidizing acids, alkali and salt solutions. Resists only temporary splashes of oxidizing acids and bleaching chemicals. • Withstands +80ºC dry heat. Does not resist abrupt changes of temperature. • Good impact resistance. • Self-levelling, to be applied with serrated or steel trowel.

Recommended Uses

• Recommended for industrial and storage facilities, repair shops; e.g. air handling units, process or paper machine units and corridors.


Practical coverage depends on the porosity and evenness of the substrate and on the application method. Film thickness 1 mm coverage approx. 1 m²/litre and film thickness 2 mm coverage approx. 0.5 m²/litre.



Application Conditions

The relative humidity of the concrete should not exceed 97%. Residual moisture content should be below 4 weight-%. During application or drying, the temperature of the ambient air, surface or coating should not fall below +15ºC and relative humidity of air should not exceed 70%.

Surface preparation

Always remove all grease, oil, and other impurities with Maalipesu detergent before grinding. Remove laitance or old peeling paint layers by power grinding, milling, or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot holes removing all loose or brittle material. Open cracks with e.g. an abrasive tool. After mechanical pre-treatment remove all loose material and dust carefully with a vacuum cleaner. The substrate must have a tensile strength above 1.5 MPa. For application on cementitious leveling screed: check compatibility with the leveling screed manufacturer.

Painting Cleaning of tools

Thinner 1061.


VOC 2004/42/EC (cat A/j) 500 g/l (2010) Temafloor PU: max. VOC < 500 g/l

Solvent-free polyurethane coating

Temafloor PU is a self-leveling polyurethane coating. It withstands mechanical and chemical stresses in industrial and storage facilities, etc.

Product usp1prof_img

Durable coating

Temafloor PU can be used for new and old concrete or asphalt floors exposed to mechanical and chemical stress.

Product usp2prof_img

Reliable and easy to clean

Temafloor PU has good resistance to abrasion and withcstands chemicals and heat. The coating forms a durable, seamless and easy-to-clean surface. Temafloor PU does not shrink or crack.

Product usp3prof_img
Painted track

You’re visiting Tikkurila website from United Kingdom. Would you like to visit the local UK site?

has been added to saved.
has been removed from saved.