Valtti Pohjuste
Not applicable
Colorless, oil-based wood preservative absorbed into substrate. Fr external use on wood surfaces by consumers and professionals. Valtti Pohjuste is absorbed into wood, slowing down the absorption of humidity and the spread of bluestain. This wood preservative product (product group 8) is approved in accordance with the Biocidal Product Regulation (EU) No. 528/2012; permit no. UK-2014-0831/FI-2015-0014. Solvent-based liquid ready for use.
-
Prevents the spread of mold
-
Makes finishing easier
-
Dry to touch in half an hour.
Product Data
Colorless, oil-based wood preservative absorbed into substrate. Fr external use on wood surfaces by consumers and professionals. Valtti Pohjuste is absorbed into wood, slowing down the absorption of humidity and the spread of bluestain. This wood preservative product (product group 8) is approved in accordance with the Biocidal Product Regulation (EU) No. 528/2012; permit no. UK-2014-0831/FI-2015-0014. Solvent-based liquid ready for use.
Product Features
For protection and priming of timber and wooden structures before surface treatment. Suitable for use on logs, sawn and planed timber, thermally treated and impregnated wood in exterior use before surface treatment. Use the product only as wood preservative as described in product data sheet and label. Finishing coats are recommended to be applied as soon as possible, because colorless priming oil does not protect the wood surface from the adverse effects of sunlight.
Recommended Uses
All wooden structures to be treated with wood stains or paints (except surfaces to be treated with wood oils and barn-red paints). Woodwork outside (use categories 2 and 3). Can be used on wooden parts left above ground that are either exposed to or protected from weather, but are exposed to repeated wetting. Not for use on wood in direct soil or water contact or in marine environment. Not to be used on interior surfaces.
Technical Information
Sawn surfaces 4–5 m²/l. Planed surfaces 10–12 m²/l.
Thinner
Solventborne
Application Method
brush
Prevents the spread of mold
Valtti Pohjuste (Primer) is a colorless protective agent that is absorbed deep into the wood, making the surface water-repellent and retarding the absorption of moisture and, consequently, the spread of mold on the treated surface.
Makes finishing easier
Valtti Pohjuste (Primer) improves the adhesion of the topcoat and keeps it clean longer. Primed board surfaces can be finished with Tikkurila house paints or the Vinha or Valtti stains. Timber surfaces can be finished with Valtti stains or Vinha.
Dry to touch in half an hour.
Valtti Pohjuste (Primer) is touch-dry in just about half an hour. The surface treatment can be applied after 24 hours of drying.
You’re visiting Tikkurila website from United Kingdom. Would you like to visit the local UK site?