Biowash

BioWash is a cleaning detergent for removing mold and algae

New and previously painted concrete, plaster, brick and metal surfaces. Recommended for use before applying BioRid, BioRid Spray or ProSeal treatments.

New and previously painted concrete, plaster, bricks and metal surfaces. Recommended for use before applying BioRid, BioRid Spray or ProSeal treatments.

Depending on the surfaces.

Waterborne

Storage time 2 years. Sudden changes in temperature should be avoided. Do not freeze. Diluted solution should not be stored.

The surface to be coated must be dry, the temperature of the air and surface at least +5 °C, and the relative humidity of the air below 80 %

Protect glass, aluminum and other similar surfaces that could be damaged by the detergent. Use a facial mask at your convenience.

First coat:

Apply BioWash diluted with water (mixing ratio 1:50) over the moldy surfaces with sponge, brush or spray. Let it sit for about 20 minutes. Whilst the surface is still wet, take out the mold by brushing or pressure washer (200 bar). Wash the surfaces well with clean water from top to bottom. After-curing Spread BioWash diluted by water (1 part detergent, 50 parts water) to the whole surface. Let it dry. Apply BioRid or BioRid Spray on the treated surface within 24 hours.For porous and absorbing surfaces, prime with ProSeal before applying BioRid or BioRid Spray.