ClimateCooler Uni Primer

Heat-reflecting water-borne modified acrylate paint.

Priming of roofs before applying ClimateCooler Uni Topcoat or ClimateCooler Catalyst

Concrete tiles, fiber-cement sheets and primed steel sheet roofs.

3-5 m²/l.

Not applicable

spraying, brush, roller

The surface to be painted must be solid and dry, air temperature at least +8 C and relative humidity of the air below 80 %. Schedule the painting work so that the paint film will be dry before the evening dew. Do not paint under the risk of rain.

Clean the surfaces from dirt, dust, moss and lichen. Use high pressure washer, avoiding damaging the substrate and structures. Apply ClimateCooler Cleaner solution according to instructions if needed. When handling a surface containing asbestos, the decision of the Council of State respecting work with asbestos No. 1380 of 1994 must be followed along with related decrees 318/2006 and 863/2010.

First coat:

Mix the paint carefully before use. Spread 200-225 µm at one time (wet film thickness). The primer can be diluted with water by 5 to 10 %, depending on the porosity of the surface. Note! Check the condition of the roof and the roof structures before starting the work.

(cat A/i) 140g/l (2010) ClimateCooler Uni Primer contains VOC max. 140g/l