Eternit Primer
Full matt
Primer for fibre cement roofs.

- Penetrates well
- Improves adhesion
- Easy and safe to use
-
858
-
5 m²/l
-
7 m²/l
-
1 h
-
-
Finish
-
Full matt
Primer for fibre cement roofs.
Product Features
Eternit Primer is a waterborne primer for fibre cement roofs, especially suitable for older very absorbent roof plates. Eternit Primer penetrates into the fibre cement plate and ensures good adhesion of the topcoat. Eternit Primer should always be overcoated with Isonit 12, 20, 50 or Rubber. Rubber is especially recommended for degraded primed fibre cement plates.
Recommended Uses
Eternit Primer is used on fibre cement, fibre cement slates and concrete. Eternit Primer is not suitable for use on clay tiles or natural slate.
5-7 m²/l (1 layer) The practical spreading rate depends on application method, form and surface of the material.
Thinner
Waterborne
Application Method
spraying, brush, roller
Storage
Store in a cool place, protected from frost in tightly closed original containers, and out of reach for children.
The temperature must be between 8° C and 30° C and relative humidity <85 % RH.
Surface preparation
Roofs to be primed with Eternit Primer should be thoroughly cleaned using high-pressure washer and Iso A-Clean.
Painting
First coat:
To ensure the optimum layer thickness, apply the paint in two layers. Allow sufficient drying time between applications. Always make a test coat to ensure the compatibility of product and surface.
Cleaning of tools
Clean tools with water and detergent.
VOC
Avoid spillage into drains, water systems and soil. Destroy liquid waste according to the local regulations. Recycle or dispose of empty, dry cans in accordance with local regulations. VOC: Max. 30 g/l (Kat. A/h)