Finngard Pohjustegeeli

Water-borne, alkali-resistant silicone-based primer for aggregate surfaces.

For priming exterior concrete and rendered surfaces. Mixed with paint for priming according to the paint’s product data sheet (e.g. Kivisil facade paint or Finngard Silikonihartsimaali). Can also be used for impregnating untreated concrete facade surfaces or similar vertical concrete surfaces.

Exterior aggregate surfaces of residential, commercial and storage buildings.

Mixed with paint: See the paint’s product data sheet (e.g. Kivisil facade paint or Finngard Silikonihartsimaali). Impregnation: 4–5 m²/l.

Waterborne

The surface to be treated must be clean and dry, the temperature at least +5 ºC and relative air humidity below 80 %. Do not apply the product onto a wet or non-absorbent surface.

Mixed with paint: See the paint’s product data sheet. Impregnation: New concrete surfaces must be sufficiently dried and hardened before the treatment. Concrete element surfaces should not be treated earlier than after one heating period, depending on the structure. Clean the surfaces of any dirt, dust and salt. Wash moldy, mossy and similar surfaces with Tikkurila Homeenpoisto according to the directions for use, working from the bottom up.

First coat:

Mixed with paint: Stir Finngard Pohjustegeeli before use. Add Finngard Pohjustegeeli to the paint and mix thoroughly (mechanically for approx. 5 minutes). See paint’s product data sheet for more instructions and details on the mixing ratio. Impregnation: Apply Finngard Pohjustegeeli evenly by spraying. Can also be applied with a brush or roller. Vertical surfaces should be treated from the bottom up. Cover windows before starting the treatment. Remove any splashes immediately from the windows. NOTE! When treating a surface containing asbestos, follow the Government Decision on Asbestos Work (1380/1994) and the related Decrees 318/2006 and 863/2010.