Finngard Uni Primer
Not applicable
Waterborne, acrylic primer paint for facade – strengthens the structure of the substrate, reduces and evens absorbency, unifies colors, improves adhesion of facade paint and isolates the topcoat from the influence of factors from the substrate.


- Unifies the colour
- Strenghtens surface
- Facade for years
-
6 m²/l
-
8 m²/l
-
5 h
-
-
Waterborne, acrylic primer paint for facade – strengthens the structure of the substrate, reduces and evens absorbency, unifies colors, improves adhesion of facade paint and isolates the topcoat from the influence of factors from the substrate.
Product Features
• Strengthens the substrate and improves adhesion of the facade paint • Thanks to the possibility of coloring, it unifies the color of the painted surface • Reduces the consumption of a topcoat • It has a wide range of applications for various mineral substrates
Recommended Uses
For use on traditional lime-cement and cement plasters, thin-layer mineral-polymer and acrylic plasters as well as concrete substrates. It can also be used for the renovation of dispersion and mineral (silicate) coatings.
6-8 m2/l per one coat, depending on the absorbency and structure of the substrate, application method and painting tool used. Attempt to determine the performance for a given substrate. Make test painting in order to determine the coverage of the substrate.
Thinner
Waterborne
Application Method
spraying, brush, roller
Work at air and substrate temp. not lower than +5°C and not higher than +25°C. Avoid direct sunlight, relative humidity> 80%, rain and frost. Protect the paint coating from rain for min. 48 hours - the optimum temperature and humidity conditions (temperature +20°C, relative humidity below 55%). This interval under conditions of elevated humidity and lower temperatures of air and ground may be extended.
Surface preparation
The substrate must be load-bearing, dry and clean. Humidity of the painted substrate should not exceed 4%. The product is suitable for commercial use and requires only thorough mixing before use. Apply one coat of Tikkurila Finngard Uni Primer. To avoid smudging and discoloration, paint the surface continuously. Technological breaks should be planned at the edges of the walls. Provide enough paint from one production batch. Mix paint from different parts before use. Do not apply on lime coatings. The facade paint should be applied not earlier than 16 hours after priming, but not later than after 48 hours.
Painting
First coat:
Apply system: primer + facade paint by Tikkurila brand. Do not apply on horizontal surfaces exposed to direct contact with weather conditions: rain, snow. The manufacturer is not responsible for poor quality coating in case when above instructions are disregarded. It is recommended to use ANZA painting tools.
VOC
Cat. A/h. Admissible content of VOC since 2010 – 30 g/l. The product includes less than 30 g/ l of VOC.