Fontecoat EP 50

A two-component water-borne epoxy topcoat and a single-coat paint.

MED
  • Fast curing
  • Environmentally friendly (low VOC emissions)
  • Excellent adhesion and surface tolerance
Documents
Product Data
Description

A two-component water-borne epoxy topcoat and a single-coat paint.


Product Features

• A semi-gloss epoxy paint to be used as a single-coat paint, primer, intermediate coat or topcoat in epoxy or polyurethane systems for steel surfaces. It dries rapidly and can be applied in thick layers. • An ideal option when a low VOC content is required. The paint has very good resistance against mechanical and chemical stress. The product provides protection comparable to that of solvent-borne epoxy paints. • Can be primed with the solvent-borne adhesion primer Temakeep. The system has extremely good adhesion and surface tolerance. At the same time, it is possible to achieve a very rapid production cycle. • Fast curing and environmentally friendly (low VOC). • Resistant to diesel and biodiesel (RME) fuel. • The product has MED (Marine Equipment Directive) certificate no EUFI29-23001468-MED and is thus accepted for painting surfaces inside the ships.


Recommended Uses

• Recommended for framework, service platforms, conveyors and other steelwork, machinery and equipment.


Related documents
Technical Information
Coverage

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated. Note! The painting work should be performed and supervised according to 12944-7 if not otherwise stated in the respective technical data sheet. Excessive film thickness may result e.g. in cracking, sagging, prolonged drying time, soft film, less chemical resistance, gloss deviation, adhesion and intercoat functionality. In case the product is used otherwise than stated in the standard a written approval from Tikkurila is required.


Thinner

Waterborne


Product usp1prof_img
Fast curing
01

Fast curing

Fontecoat EP 50 is a semi-gloss epoxy paint to be used as a single-coat paint, primer, intermediate coat or topcoat in epoxy or polyurethane systems for steel surfaces. It dries rapidly and can be applied in thick layers.

Product usp2prof_img
Environmentally friendly (low VOC emissions)
02

Environmentally friendly (low VOC emissions)

Fontecoat EP 50 is an ideal option when a low VOC content is required. The paint has very good resistance against mechanical and chemical stress. The product provides protection comparable to that of solvent-borne epoxy paints.

Product usp3prof_img
Excellent adhesion and surface tolerance
03

Excellent adhesion and surface tolerance

Fontecoat EP 50 can be primed with the solvent-borne adhesion primer Temakeep. The system has extremely good adhesion and surface tolerance. At the same time, it is possible to achieve a very rapid production cycle.

English
Hello!

You’re visiting Tikkurila website from United Kingdom. Would you like to visit the local UK site?

has been added to saved.
has been removed from saved.
en