Fontefire ST 60-1

A water-borne, thin film intumescent coating for efficient protection against cellulosic fires. When subjected to heat it expands and forms an insulating layer of foam.

• Due to highly competitive loadings, reduces paint consumption thus saving costs and throughput time. In addition to that, lower loadings enable faster overcoating of painted sections. Fontefire ST 60-1 provides efficient fire protection for constructional steelwork up to class R120 in the fire resistance classification. • As a one-component product easy to apply on site. The sagging value is very good and the paint can be applied to a smooth matt finish. The CE-marked Fontefire ST 60-1 is compatible with a wide range of primers and topcoats. The product is tested and approved in accordance with ETA. • Can be used in semi-exposed conditions (Type Y, EAD 350402-00-1106) without any topcoat. The paint is certified for ‘H’ or ‘I’ shaped beam and column sections as well as rectangular/circular hollow columns and rectangular hollow beams. • Has extremely low volatile emission compounds thus resulting in a safer working environment while meeting the most stringent environmental demands. • Recommended to be applied on-site during dry conditions. Components painted in workshops must be topcoated and properly dried before taken outdoors.

Maximum wet film thickness of 1.2 mm can be achieved in a single spray coat by applying few quick passes. Maximum film thickness will depend on application conditions. Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Waterborne

9 months in dry and cool conditions.