Fontefloor PU Cem 6-9
Not applicable
A solvent-free, water-borne hybrid polyurethane concrete mortar flooring for extreme service conditions.
- Combination of high-chemical, mechanical and fluctuating thermal resistance
- Excellent resistance to hot water and permanent water loading
- Non-absorptive & impermeable
A solvent-free, water-borne hybrid polyurethane concrete mortar flooring for extreme service conditions.
Product Features
• Combination of high chemical, mechanical and fluctuating thermal resistance. Fontefloor PU Cem is a seamless heavy duty flooring system resisting wide range of chemicals, abrasion and thermal shocks. The product is an ideal solution for extreme service conditions. • Excellent resistance to hot water and permanent water loading. Fontefloor PU Cem 6-9 withstands repeated spillage of hot and cold liquids up to +120°C. Therefore the product is most suitable for e.g. food and beverage industry. • Non-absorptive & impermeable. Fontefoor PU Cem 6-9 does not absorp or penetrate any liquids or dirt, thus making it easy to clean. The product is a perfect choice for surfaces with high demand of hygiene. • Resists constant temperatures from -20°C to +90°C depending on layer thickness.
Recommended Uses
• Designed to be used in food industry, especially when chemical resistance and resistance to organic acids is required.
Solventfree
Storage
Under cover and free of the ground, in dry conditions above +5°C and below +25°C. This is particularly important for the part C. Protect from frost even during transport.
The relative humidity of the concrete should not exceed 97%. Residual moisture content should be below 4 weight-%. The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying. Relative humidity of air should not exceed 80%.
Surface preparation
Always remove all grease, oil, and other impurities with Maalipesu detergent before grinding. Remove laitance or old peeling paint layers by power grinding, milling, or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot holes removing all loose or brittle material. Open cracks with e.g. an abrasive tool. After mechanical pre-treatment remove all loose material and dust carefully with a vacuum cleaner. The substrate must have a tensile strength above 1.5 MPa. For application on cementitious leveling screed: check compatibility with the leveling screed manufacturer.
Painting Cleaning of tools
Cleaning of equipment with Thinner 1061. Equipment should be cleaned immediately after use before the mortar has dried.
VOC
VOC 2004/42/EC (cat A/j) 140 g/l (2010) Fontefloor PU Cem 6-9: max. VOC < 140 g/l
