Fontefloor PU Matt
Not applicable
A two-component, water-borne polyurethane paint that provides good hiding power and gives a matt finish.
- M1 classified
- Matt appearance
- Wide spectrum of colors
A two-component, water-borne polyurethane paint that provides good hiding power and gives a matt finish.
Product Features
• Part of Tikkurila Cozy Floor system. • Can also be used as a topcoat on Fontefloor EP Primer or Fontefloor EP 100 in premises with moderate mechanical load. • The M1 classification for low-emitting building materials has been granted by the Finnish Building Information Foundation RTS. M1 classification enhances good indoor air quality. Due to its extremely low VOC content Fontefloor PU Matt ensures healthy environment in hospitals, schools and day care centres. • The wide range of available colours of Fontefloor PU Matt gives almost free hands to the designer. The coating enables unique final appearance of the floor. • Due to high UV-resistance Fontefloor PU Matt remains its color and gloss even in premises with large windows. Matt finish enhances the coziness of the room.
Coverage on concrete floors is on the average: Finishing: 10–20 m2/l Practical coverage depends on the porosity and evenness of the substrate and on the application method.
Thinner
Waterborne
The relative humidity of the concrete should not exceed 97%. Residual moisture content should be below 4 weight-%. The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying. Relative humidity of air should not exceed 80%.
Surface preparation
Always remove all grease, oil, and other impurities with Maalipesu detergent before grinding. Remove laitance or old peeling paint layers by power grinding, milling, or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot holes removing all loose or brittle material. Open cracks with e.g. an abrasive tool. After mechanical pre-treatment remove all loose material and dust carefully with a vacuum cleaner. The substrate must have a tensile strength above 1.5 MPa. For application on cementitious leveling screed: check compatibility with the leveling screed manufacturer.
Painting
First coat:
Nylon or cotton roller. For best results, use a high-quality, short-haired roller with rounded edges.
Cleaning of tools
Water. Equipment should be cleaned immediately after use before the paint has dried.
VOC
VOC 2004/42/EC (cat A/j) 140 g/l (2010) Fontefloor PU Matt: max. VOC < 140 g/l
