Novofloor 2-K Elastic

Elastic, self-levelling, UV-resistant, solvent-free 2-component polyurethane floor coating.

For floors with concrete, asphalt, and cement mortar surfaces that require flexibility, good water resistance and crack bridging. Easy to clean because of its glossy and dense surface. For professional use only.

For coating of the floors of balconies, outdoor corridors, outdoor passenger corridors, etc outdoors and indoors.

1.1 -1.5kg/m², dry film thickness 0.7 – 1.0mm.

Solventborne

In a cool and dry place. The product reacts with moisture in the air and must be stored carefully in a sealed container. The storage time of the container if unopened, is 12 months. It is recommended that an opened container is used at once.

The concrete surface should be dry and at least 4 weeks old. The relative humidity of the concrete should be less than 97%. During painting and drying, the air, the base and the paint must be between +10 and +25ºC and the relative air humidity less than 80%.

New concrete floor: The concrete adhesive layer is mechanically removed from the surface of the concrete, e.g. by sandblasting or diamond grinding. The best method for removal is chosen according to the space in question. After mechanical cleaning, the cement dust is carefully hoovered or washed off with water. Cement adhesive can also be removed with hydrochloric acid pickling. Pickling is made with diluted hydrochloric acid (1 part strong hydrochloric acid, 4 parts water). Then the floor is rinsed with plenty of water and dried well. Old concrete floor: The floor is cleaned from dust and loose debris. Grease, oil, chemicals and other impurities are removed by emulsion washing. Old and flaking paint is removed by sandblasting, grinding or milling. The best method for cleaning is chosen according to the space in question. Floor holes are cleaned until a healthy and clean concrete is exposed. The cracks are opened, for example, with an angle grinder. Loose material and dust are removed.

Novofloor thinner.

The painted surface reaches its final usage and chemical resistance about 1 week after the surface treatment. Avoid cleaning treatment during this time. Clean the surface with a brush, mop or dusting cloth. Dirty surfaces can be cleaned with a neutral (pH 6-8) detergent moistened cleaning tool.

(cat A/j) 500g/l (2010) Novofloor 2-K Elastic contains VOC max. 500g/l.