Novofloor 2-K Elastic Color

A solvent free, tintable flexible and weather resistant two-component polyurethane coating.

• Excellent UV resistance. • Withstands mechanical wear and chemical stress. • Flexible, crack-bridging coating. • The M1 classification for low-emitting building materials has been granted by the Finnish Building Information Foundation RTS.

Used for covering floors in balconies, open galleries, etc.

Practical coverage depends on the evenness of the substrate and on the application method. Film thickness 1.0mm coverage approx. 1 m2 per litre

Solventfree

The relative humidity of the concrete should not exceed 97%. The residual moisture of the substrate must not exceed 4%. The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying. Relative humidity of air should not exceed 70%.

New concrete: Remove laitance by power grinding, vacuum grit blasting or hydrochloric acid etching. Choose the method best suited for the premises. After grinding remove dust carefully with a vacuum cleaner. Hydrochloric acid etching is carried out with diluted hydrochloric acid (1 part concentrated hydrochloric acid, 4 parts water). Rinse with plenty of water. Dry the floor. Old concrete floor: Remove old, flaky paint film with diamond grinding or sandblasting. Choose the method best suited for the premises. Clean the cavities and potholes in the floor up to healthy, clean concrete. Open cracks, eg with an angle grinder. Remove loose material and dust.

Novofloor Ohenne

VOC 2004/42/EC (cat A/j) 500 g/l (2010) Novofloor 2-K Elastic Color: max. VOC < 500 g/l