Presto ALR
Not applicable
Ready-to-use, light all-around filler. Water-borne. Minor shrinkage and good adhesion. Fulfils the requirements of wear resistance category 04.



- Spray-on filler for interior walls
- For new and old surfaces
- Easy to use
Ready-to-use, light all-around filler. Water-borne. Minor shrinkage and good adhesion. Fulfils the requirements of wear resistance category 04.
Product Features
For partial and complete leveling of ceilings and walls and for attaching seam strips in dry interior spaces. Suitable in particular to board walls as well as concrete, light concrete and plaster surfaces and old paint surfaces. You can paint or apply wallpaper over the leveled surface.
Recommended Uses
Wall and ceiling surfaces in dry interior spaces.
On average 1 l/m² with a plaster thickness of 1 mm. The required amount of depends on the surface.
Thinner
Waterborne
Storage
Must be protected from frost. Keeps unopened for 1 year.
The surface to be treated must be dry. The minimum ambient temperature for use of the product is +10ºC and maximum relative air humidity 80%.
Surface preparation
Clean the surfaces by removing any grease and dirt. Remove any dust and loose material by brushing.
Painting
First coat:
Apply Presto ALR on wall and ceiling surfaces with a psteel trowe, roller or aste-spraying gun. When attaching a paper seam strip, follow the instructions provided by the manufacturer of the device. Sand the surface when the filler has dried. One or two applications will suffice under normal conditions. For previously leveled ceilings, you do not have to sand the final layer. You can paint or apply wallpaper over the leveled surface. It is recommended to prime the leveled surface before wallpapering.
Spray-on filler for interior walls
Suitable for jointing and surfacing
For new and old surfaces
Easy to apply and sand
Easy to use
High filling capacity
You’re visiting Tikkurila website from United Kingdom. Would you like to visit the local UK site?