Prestonit 10 + 10

Ready-to-use spray plaster. Fulfills the requirements of wear resistance category 04.

For priming and leveling interior ceiling and wall surfaces in dry premises.

Suitable for concrete, light-weight concrete, rendered, plaster, gypsum board and woodfiber board surfaces. Also good adhesion for previously painted surfaces.

On average 1 l/m² with a plaster thickness of 1 mm. The required amount of depends on the surface.

Waterborne

Protect from frost. Store in dry and cool place, protected from sunlight. A product kept in a half-empty can will not withstand long-term storage.

The surface to be treated must be dry and the temperature at least +10 °C.

Clean the surfaces by removing any grease and dirt. Remove any dust and loose material by brushing.

First coat:

Apply Prestonit 10 +10 with suitable spray equipment. Spread the filler 0-10 mm and let it rest a moment before smoothing with a steel trowel. By working this way, ensures best filling ability. The filler can also be applied manually. To get even leveled end result does not consider to make the evenly thick filler layer. Depending on the unevenness of the surface the thickness of the filler layer can change from 0 to 10 mm. Sand the surface when the filler has dried. One or two applications will suffice under normal conditions. The leveled surface can be painted, tiled or covered with plastic wallpaper.

Clean tools with water.