Prestonit ALR

Ready-to-use, light spray filler. Water-borne. Minor shrinkage and good adhesion. Fulfils the requirements of wear resistance category 04.

M1 CE PolishHygenicCertification

Prestonit ALR

Ready-to-use, light spray filler. Water-borne. Minor shrinkage and good adhesion. Fulfils the requirements of wear resistance category 04.

  • 24 h
  • 2 h
Description

Ready-to-use, light spray filler. Water-borne. Minor shrinkage and good adhesion. Fulfils the requirements of wear resistance category 04.


Product Features

For partial and complete leveling of ceilings and walls and for attaching seam strips in dry interior spaces. Suitable in particular to board walls as well as concrete, light concrete and plaster surfaces and old paint surfaces. You can paint or apply wallpaper over the leveled surface.


Recommended Uses

Wall and ceiling surfaces in dry interior spaces.


Coverage

On average 1 l/m² with a plaster thickness of 1 mm. The required amount of depends on the surface.


Application Method

flat-bladed steel trowel, spraying


Storage

Keeps unopened for 1 year.


Application Conditions

The surface to be treated must be dry. The minimum ambient temperature for use of the product is +10ºC and maximum relative air humidity 80%.


Surface preparation

Clean the surfaces by removing any grease and dirt. Remove any dust and loose material by brushing.


Painting

First coat:

Apply Prestonit ALR on wall and ceiling surfaces with a paste-spraying gun and smooth with a steel trowel. When attaching a paper seam strip, follow the instructions provided by the manufacturer of the device. The plaster can also be applied manually. Sand the surface when the filler has dried. One or two applications will suffice under normal conditions. For previously leveled ceilings, you do not have to sand the final layer. You can paint or apply wallpaper over the leveled surface. It is recommended to prime the leveled surface before wallpapering.


English
has been added to saved.
has been removed from saved.
en