Prestonit V
Not applicable
Ready-to-use spray plaster. Fulfills the requirements of wear resistance category 05.
- For demanding surfaces
- Suitable for jointing and surfacing
- With anti-mold agent
- 8010
- 1 l/m²
- 1 h
Ready-to-use spray plaster. Fulfills the requirements of wear resistance category 05.
Product Features
For priming and leveling interior ceiling and wall surfaces in damp conditions. Suitable for concrete, light-weight concrete, rendered, plaster, gypsum board and woodfiber board surfaces. Also suitable for previously painted surfaces. The surface can be painted, tiled or covered with plastic wallpaper.
Recommended Uses
For partial and complete leveling of wall and ceiling surfaces.
On average 1 l/m² with a plaster thickness of 1 mm. The required amount of depends on the surface.
Thinner
Waterborne
The surface to be treated must be dry and the temperature at least +10 °C.
Surface preparation
Clean the surfaces by removing any grease and dirt. Remove any dust and loose material by brushing.
Painting
First coat:
Apply Prestonit V spray plaster with a paste-spraying gun and smooth with a steel trowel. The plaster can also be applied manually. Sand the surface when the plaster has dried. One or two applications will suffice under normal conditions. The leveled surface can be painted, tiled or covered with plastic wallpaper.
For demanding surfaces
Prestonit V meets the requirements for stress classification 05. Moisture resistant filler is for base and surface levelling in moist interior rooms.
Suitable for jointing and surfacing
In addition to levelling the surface, the filler is suitable for fastening of jointing tape and filling gypsum board joints.
With anti-mold agent
Prestonit V contains an anti-mold agent and offers long-term protection against mold.
You’re visiting Tikkurila website from United Kingdom. Would you like to visit the local UK site?