Prof Euro 20

Professional extra resistant to washing waterborne interior paint.

Suitable for painting walls and ceilings inside premises with moderate and high humidity and with high maintenance.

Suitable for painting previously painted and unpainted walls and ceilings inside premises with moderate and high humidity and with high maintenance such as: kitchen, bathroom, toilet, laundry, etc. on concrete, brick, plastered surfaces, filler-treated, gypsum plasterboard, particle board and wood-fiber plates, wallpaper for painting, suitable for painting radiators. Resistant to steam and condensation, protects against mold and fungus. Can be used in child welfare institutions and facilities of the administrative group of medical institutions.

9-12 m²/l on smooth non-absorbent surface; 6-8 m²/l on rough absorbent surface.

Waterborne

spraying, brush, roller

Protect from the frost. Store and transport at temperature above 5 °C in tightly closed containers, protecting against moisture, heat and direct sunlight. Warranty storage period in unopened original package – 36 months. About the Google Translate Community About GoogleRules and Guidelines Help Submit a Review About the Google Translate Community About GoogleRules and Guidelines Help Submit a Review

The surface to be painted must be dry and clean , the temperature at least 5°C and the relative humidity of the air not more than 80%.

Unpainted surfaces: Clean the unpainted surfaces of any dirt, dust and fat. Rough and absorbent surfaces is recommended to primed with primers Tikkurila Euro Primer or Tikkurila Prof Base. In case of continuous filler, no priming is required. Priming is mandatory before application on rough absorbent surfaces and surfaces filled with dry construction mixtures. Surfaces with mold, moss etc. are cleaned with Tikkurila Homeenpoisto in accordance with the instructions. When applied to radiators, pre-primed with Tikkurila Rostex primer. Previously painted surface: Remove any flaking, chalky and poorly adhering paint coats. Sand the surface, remove the sanding dust. Surfaces with mold, moss etc. are cleaned with Tikkurila Homeenpoisto in accordance with the instructions. Whitewash or lime paint completely removed, then clean the surface with water and detergent Tikkurila Maalipesu, after that washed with clean water and let it dry. Fill any holes and cracks and level the surfaces with filler Tikkurila Euro Filler or Euro Filler Light. Let the filler dry, sand the surfaces, remove the sanding dust and primed with primers Tikkurila Euro Primer or Tikkurila Prof Base

First coat:

Stir the paint well before use. If necessary, thinning with water no more than 5% by volume in case of application by brush or roller, no more than 10% by volume in case of application by spray. Reserve enough paint from the same production batch for a uniform color of surface. Apply the paint in 2 coats.

Clean tools with water. Remove lightly hardened paint with detergent Tikkurila Pensselipesu.

If needed, after approx. 1 month from surface treatment, not the earliest. Clean the surfaces with a neutral (pH 6–8) washing solution with soft brush or soft sponge. Clean very dirty surfaces with a mild alkaline (pH 8–10) cleaning solution e.g. with soft brush or soft sponge. Wash off the solution with water using a sponge. After cleaning, the surface should not remain wet. The surfaces must be handled with care for a few weeks, as the product will reach its final hardness and durability in about one month under normal conditions. If the surfaces need cleaning soon after the surface treatment, clean lightly by using a soft brush or a damp cloth. About the Google Translate Community About GoogleRules and Guidelines Help Submit a Review About the Google Translate Community About GoogleRules and Guidelines Help Submit a Review

Contains VOC max. 30 g/l.