Proseal
Full matt
ProSeal is a water-borne primer with good penetrating properties. To be used for absorbing surfaces before applying BioRid, BioRid Spray or AsbestGuard.
- A unique primer for the BioRid system
- 805
- 2 m²/l
- 10 m²/l
- 3 h
- 1 h
Finish
-
Full matt
ProSeal is a water-borne primer with good penetrating properties. To be used for absorbing surfaces before applying BioRid, BioRid Spray or AsbestGuard.
Product Features
ProSeal is a water-borne primer with good penetrating properties.To be used for absorbing surfaces before applying BioRid, BioRid Spray or AsbestGuard.
Recommended Uses
ProSeal is suitable for priming of interior walls and ceilings, on absorbing substrates. ProSeal can also be used for binding asbestos dust. Read the application instructions carefully before painting.
Depending on the porosity of the substrate, 2-10 m²/l .
Thinner
Waterborne
Storage
Must be protected from frost. Store in a dry and cool place, protected from sunlight. Close the can carefully for the next use. The opened container does not withstand long-term storage.
The surface to be painted must be dry, the temperature at least +5°C and the relative humidity of the air below 80%.
Surface preparation
Remove dirt and dust from the surfaces. Apply BioWash on mold affected surfaces according to instructions. Let the surface dry. Fill the surfaces with suitable Presto or Prestonit filler, if needed. Remove the sanding dust.
Painting
First coat:
Spread once with roller, spray or brush. The product is used without thinning.
Cleaning of tools
Remove excess paint from tools and wash with water. Tikkurila Pensselipesu is recommended for products that have hardened to a certain extent.
VOC
(cat A/h) 50g/l (2010) ProSeal contains VOC max. 50g/l.
A unique primer for the BioRid system
The primer with good penetrating properties has been developed for the BioRid system.
You’re visiting Tikkurila website from United Kingdom. Would you like to visit the local UK site?