Sisä 2
Full matt
Water-borne dispersion paint for interior use.


-
805
-
3 m²/l
-
9 m²/l
-
2 h
-
0.5 h
-
Finish
-
Full matt
Water-borne dispersion paint for interior use.
Product Features
For priming of concrete, plaster, filler, plasterboard, and wood fiberboard surfaces according to instructions.
Recommended Uses
Wall and ceiling surfaces in dry interior spaces.
Absorbent surfaces 3 - 5 m²/l. Non-absorbent surfaces 7 - 9 m²/l.
Thinner
Waterborne
The surface to be painted must be dry, the temperature at least +5°C and the relative humidity of the air below 80%.
Surface preparation
Unpainted surfaces: Clean the surfaces by removing any dirt and dust. If needed, fill the surfaces with a suitable filler and sand the dried surface. Remove the sanding dust. Previously painted surfaces: Wash the surfaces with diluted paint cleaning agent and rinse carefully with water. Fill cracks and holes with a suitable filler and sand the dried surface. Remove the sanding dust.
Painting
First coat:
Stir Sisä 2 well before use and thin with water, if necessary. Apply 1-2 coats with a roller, brush, or spray.
Maintenance Painting:
Surfaces painted with Sisä 2 can be maintenance painted with the same or similar water-borne paint. See Pretreatment.
Maintenance Instructions
If needed, approx. 1 month after painting at the earliest: The surfaces are preferably dry-cleaned by using a vacuum cleaner, soft brush or dust towel. Damp cleaning can leave marks on the surface, especially on dark shades.
VOC
(cat A/a) max. 30g/l (2010). Sisä 2 contains VOC max. 30g/l.