Temacoat HS-F Primer
Semi-matt
A two-component high-solids, fast-drying all seasons epoxy primer containing anti-corrosive pigments.
- Short overcoating time with polyurethane topcoats
- Wide range of film thicknesses achievable in one layer
- Good adhesion to steel, zinc and aluminum surfaces
A two-component high-solids, fast-drying all seasons epoxy primer containing anti-corrosive pigments.
Product Features
• Fast drying of Temacoat HS-F Primer enables rapid overcoating with polyurethane topcoats, thus shortening overall painting time. • With Temacoat HS-F Primer, it is possible to achieve both thin and thick dry film thicknesses with the same product. Eases the painting process of multiform structures. • Due to Temacoat HS-F Primer’s good adhesion to the substrate and the subsequent coat, it provides excellent corrosion protection for the paint system. • Good adhesion to steel, zinc and aluminium surfaces. • Used as a primer or an intermediate coat on surfaces exposed to climatic, mechanical and chemical stress. • Fast drying even at low temperatures. • Pigmented with zinc phosphate. • Resistant to grey/waste water when applied 2x125µm, tested 6 months.
Recommended Uses
• Recommended for building frameworks, bridges, conveyors and other steelwork and equipment.
Short overcoating time with polyurethane topcoats
Fast drying of Temacoat HS-F Primer enables rapid overcoating with polyurethane topcoats, thus shortening overall painting time.
Wide range of film thicknesses achievable in one layer
With Temacoat HS-F Primer, it is possible to achieve both thin and thick dry film thicknesses with the same product. Eases the painting process of multiform structures.
Good adhesion to steel, zinc and aluminum surfaces
Due to Temacoat HS-F Primer’s good adhesion to the substrate and the subsequent coat, it provides excellent corrosion protection for the paint system.