Temafloor 200 Primer

A two-component solvent-free epoxy varnish.


Temafloor 200 Primer

A two-component solvent-free epoxy varnish.


  • High gloss


A two-component solvent-free epoxy varnish.

Product Features

• Thinned Temafloor 200 Primer penetrates well into the pores of the concrete sealing the surface and giving good adhesion for coatings and screeds. • Mixed with sand also suitable for patching of concrete floors.

Recommended Uses

• Suitable for priming of new and old concrete floors prior to laying Temafloor coatings and screeds.


Coverage on concrete floors is on the average: 1st primer coat 4–8 m²/l 2nd primer coat 6–10 m²/l. Practical coverage depends on the porosity and evenness of the substrate and on the application method.



Application Conditions

The relative humidity of the concrete should not exceed 97%. The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying. Relative humidity of air should not exceed 80%. Note! There is a natural tendency of this coating to chalk, discolor or yellow unevenly. It is recommended to use polyurethane topcoat when there are high aesthetical requirements on color appearance.

Surface preparation

New concrete: Remove laitance by power grinding, vacuum grit blasting or hydrochloric acid etching. Choose the method best suited for the premises. After grinding remove dust carefully with a vacuum cleaner. Hydrochloric acid etching is carried out with diluted hydrochloric acid (1 part concentrated hydrochloric acid, 4 parts water). Rinse with plenty of water. Dry the floor. Old concrete: Remove all grease, oil, chemicals and other impurities by Maalipesu detergent. Remove old peeling paint layer by grinding or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot-holes removing all loose friable material. Open cracks with e.g. an abrasive tool. Remove loose material and dust. If cementitious screed is used, check compatibility with the levelling screed manufacturer.


First coat:

Roller, steel or rubber trowel.

Cleaning of tools

Thinner 006 1029 (or Thinner 006 1031).


VOC 2004/42/EC (cat A/j) 500 g/l (2010) Temafloor 200 Primer: max. VOC < 500 g/l

For fast priming

Temafloor 200 Primer gives good adhesion for Temafloor coatings and screeds and dries fast. Short overcoating time enables whole system application in one day.

Product usp1prof_img
Cow Shed

Good primer for patching

Mixed with sand Temafloor 200 Primer is also suitable for patching of concrete floors.

Product usp2prof_img
Food Production Facility
has been added to saved.
has been removed from saved.