Temafloor 210 Clear

A two-component solvent-free epoxy varnish.

CE

Temafloor 210 Clear

A two-component solvent-free epoxy varnish.

Finish

  • High gloss

Description

A two-component solvent-free epoxy varnish.


Product Features

• Good resistance against abrasion, oils and grease. • Also for dust binding and priming of new and old concrete floors prior to laying Temafloor epoxy coatings and screeds; especially where solventless and odourless products are needed. • Can be used as a finishing varnish in the Mosaic flooring system. • Filled with sand also suitable for patching of concrete floors.


Recommended Uses

• Used as a binder for Temafloor 4000 Compact troweling screed. • Suitable also for topcoating of concrete floors indoors.


Can Sizes

10,0 L, 200,0 L


Coverage

Coverage on concrete floors is on the average: primer 5–8 m²/l and topcoat 6–10 m²/l. Practical coverage depends on the porosity and evenness of the substrate and on the application method.


Thinner

Solventfree


Application Conditions

The relative humidity of the concrete should not exceed 97%. The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying. Relative humidity of air should not exceed 80%. Note! There is a natural tendency of this coating to chalk, discolor or yellow unevenly. It is recommended to use polyurethane topcoat when there are high aesthetical requirements on color appearance.


Surface preparation

New concrete: Remove laitance by power grinding, vacuum grit blasting or hydrochloric acid etching. Choose the method best suited for the premises. After grinding remove dust carefully with a vacuum cleaner. Hydrochloric acid etching is carried out with diluted hydrochloric acid (1 part concentrated hydrochloric acid, 4 parts water). Rinse with plenty of water. Dry the floor. Old concrete: Remove all grease, oil, chemicals and other impurities by Maalipesu detergent. Remove old peeling paint layer by grinding or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot-holes removing all loose friable material. Open cracks with e.g. an abrasive tool. Remove loose material and dust. If cementitious screed is used, check compatibility with the levelling screed manufacturer.


Painting Cleaning of tools

Thinner 1029.


VOC


VOC 2004/42/EC (CatA/{Phrase6_Key1}) {Phrase6_Key2} g/l (2010).The VOC amount is < {Phrase6_Key3} g/l.

Why you should choose Temafloor 210 Clear

Solvent-free epoxy varnish

Temafloor 210 Clear is a solvent-free varnish used for dust binding, priming and topcoating especially where solventless and odourless products are needed. The lacquer can be used for patching when filled with sand.

Product usp1prof_img
Concrete Floor

High quality finish

Temafloor 210 Clear is widely used and has the highest quality. It has good resistance against abrasion, oils and grease. Varnish forms glossy, smooth and non-yellowing finish. Temafloor 210 Clear can be applied with mosaic flakes as a top lacquer.

Product usp2prof_img
Design floor lacqour
has been added to saved.
has been removed from saved.