Temafloor 220W Primer

A two-component solvent-free epoxy varnish.

CE

Temafloor 220W Primer

A two-component solvent-free epoxy varnish.

Finish

  • High gloss

Description

A two-component solvent-free epoxy varnish.


Product Features

• For priming of new and old concrete floors prior to laying Temafloor coatings and screeds. • Good resistance against oil and grease.


Recommended Uses

• Suitable for priming of damp concrete (relative humidity of the concrete over 97%) surfaces.


Coverage

Coverage on concrete floors is on the average 6–10 m²/l. Practical coverage depends on the porosity and evenness of the substrate and on the application method.


Application Conditions

The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying. Relative humidity of air should not exceed 80%. Note! There is a natural tendency of this coating to chalk, discolor or yellow unevenly. It is recommended to use polyurethane topcoat when there are high aesthetical requirements on color appearance.


Surface preparation

New concrete: Remove laitance by power grinding, vacuum grit blasting or hydrochloric acid etching. Choose the method best suited for the premises. After grinding remove dust carefully with a vacuum cleaner. Hydrochloric acid etching is carried out with diluted hydrochloric acid (1 part concentrated hydrochloric acid, 4 parts water). Rinse with plenty of water. Dry the floor. Old concrete: Remove all grease, oil, chemicals and other impurities by Maalipesu detergent. Remove old peeling paint layer by grinding or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot-holes removing all loose friable material. Open cracks with e.g. an abrasive tool. Remove loose material and dust.


Painting Cleaning of tools

Thinner 006 1029 (or Thinner 006 1031).


VOC


VOC 2004/42/EC (CatA/{Phrase6_Key1}) {Phrase6_Key2} g/l (2010).The VOC amount is < {Phrase6_Key3} g/l.

Solvent-free epoxy lacquer

Temafloor 220W Primer is a solvent-free varnish used for priming of new and old concrete floors, especially where solventless and odourless products are needed.

Product usp1prof_img
Chemical Warehouse

Accelerates construction works

Temafloor 220W Primer is mostly used for damp concrete with relative humidity of the concrete over 97%, when curing process is still in progress. Thus, it makes construction works ready faster.

Product usp2prof_img
Fish Plant
has been added to saved.
has been removed from saved.