Temafloor 25 Clear

A one-component moisture curing polyurethane primer and topcoat.

CE

Temafloor 25 Clear

A one-component moisture curing polyurethane primer and topcoat.

Finish

  • Full gloss

Description

A one-component moisture curing polyurethane primer and topcoat.


Product Features

• Easy to apply due to one component formulation. • Temafloor 25 Clear is dust binding and prevents impurities from being absorbed into the surface. • For topcoating of Mosaic floors. • Excellent resistance to abrasion.


Recommended Uses

• For varnishing of concrete, asbestos cement and other mineral floors.


Coverage

Coverage on concrete floors is on the average 4–7 m²/l. Practical coverage depends on the porosity of the substrate and on the application method.


Thinner

Solventborne


Application Conditions

The relative humidity of the concrete should not exceed 97%. The temperature of the ambient air, surface or coating should not fall below +5ºC during application or drying. Relative humidity of air should be 50–90 %.


Surface preparation

New concrete: Remove laitance by power grinding or hydrochloric acid etching. Choose the method best suited for the premises. After grinding remove dust carefully with a vacuum cleaner. Hydrochloric acid etching is carried out with diluted hydrochloric acid (1 part concentrated hydrochloric acid, 4 parts water). Rinse with plenty of water. Dry the floor. Old concrete: Remove all grease, oil, chemicals and other impurities by Maalipesu detergent. Remove old peeling paint layer by grinding. Choose the method best suited for the premises. Clean out pot-holes removing all loose friable material. Open cracks with e.g. an abrasive tool. Remove loose material and dust. If cementitious screed is used, check compatibility with the levelling screed manufacturer.


Painting Cleaning of tools

Thinner 1061.


VOC


VOC 2004/42/EC (CatA/{Phrase6_Key1}) {Phrase6_Key2} g/l (2010).The VOC amount is < {Phrase6_Key3} g/l.

Dries fast due to moisture curing

Temafloor 25 Clear is easy to apply and it dries fast. The lacquer is mostly used for dust binding and priming, but also for topcoating with mosaic flakes.

Product usp1prof_img
Production Facility

Functions in low temperatures

Temafloor 25 Clear can be apllied in low temperature, and relative humidity of air should be 50–90 %.

Product usp2prof_img
Design floor
has been added to saved.
has been removed from saved.