Temafloor 3000

A solvent-free epoxy resin screed. The screed is prepared by adding sand toTemafloor P300 epoxy coating mixture.

CE

Temafloor 3000

A solvent-free epoxy resin screed. The screed is prepared by adding sand toTemafloor P300 epoxy coating mixture.

Finish

  • High gloss

Description

A solvent-free epoxy resin screed. The screed is prepared by adding sand toTemafloor P300 epoxy coating mixture.


Product Features

• Excellent resistance to abrasion. • Withstands water, oils, greases, chemicals and diluted solutions of non-oxidizing acids, alkali and salt solutions. Resists only temporary splashes of oxidizing acids and bleaching chemicals. Separate chemical resistance table available. • Withstands +70ºC dry heat and +60ºC in immersion. Does not resist abrupt, great or repeated changes of temperature. • Self-levelling. Can be used for floors with a max. slope of 5%. • Temafloor Flex hardener makes the paint surface flexible and thus more resistant to cracking of concrete and improves the impact resistance.


Recommended Uses

• For new and old concrete floors exposed to heavy mechanical and chemical stress in industrial facilities, warehouses and repair shops; e.g. process or paper machine units, corridors and other floors subjected to high point loadings.


Can Sizes

Not applicable


Coverage

For a flat substrate: 1 mm layer: 1 litre ready for use screed / m². 2 mm layer: 2 litres ready for use screed / m². 4 mm layer: 4 litres ready for use screed / m². Practical coverage depends on theevenness of the substrate.


Application Conditions

The relative humidity of the concrete should not exceed 97%. The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying. Relative humidity of air should not exceed 80%. Note! There is a natural tendency of this coating to chalk, discolor or yellow unevenly. It is recommended to use polyurethane topcoat when there are high aesthetical requirements on color appearance.


Surface preparation

New concrete: Remove laitance by power grinding, vacuum grit blasting or hydrochloric acid etching. Choose the method best suited for the premises. After grinding remove dust carefully with a vacuum cleaner. Hydrochloric acid etching is carried out with diluted hydrochloric acid (1 part concentrated hydrochloric acid, 4 parts water). Rinse with plenty of water. Dry the floor. Old concrete: Remove all grease, oil, chemicals and other impurities by Maalipesu detergent. Remove old peeling paint layer by grinding, milling or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot-holes removing all loose friable material. Open cracks with e.g. an abrasive tool. Remove loose material and dust. If cementitious screed is used, check compatibility with the levelling screed manufacturer.


Painting

First coat:
Adjustable or steel trowel or spiked roller.


Cleaning of tools

Thinner 006 1029 or 006 1031.


VOC


VOC 2004/42/EC (CatA/{Phrase6_Key1}) {Phrase6_Key2} g/l (2010).The VOC amount is < {Phrase6_Key3} g/l.

Why you should choose Temafloor 3000

Self-leveling epoxy screed

Temafloor 3000 is prepared by adding sand to Temafloor P 300 epoxy coating mixture. Temafloor 3000 withstands heavy mechanical and chemical stress in industrial and warehouse facilities.

Product usp1prof_img
Paper Factory

The widest color range on the market

The wide range of colors are avalible for Temafloor 3000 combined with excellent abrasion resistance.

Product usp2prof_img
Production facility
has been added to saved.
has been removed from saved.