Temafloor 310 ESD Primer
Matt
A solvent-borne, two-component, electrically conductive epoxy primer.
Finish
-
Matt
A solvent-borne, two-component, electrically conductive epoxy primer.
Product Features
• Used for priming of Temafloor 4000 ESD grinding screed. Surface-to-ground resistance <150 kΩ.
Solventborne
The relative humidity of the concrete should not exceed 97%. Residual moisture content should be below 4 weight-%. The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying. Relative humidity of air should not exceed 80%.
Surface preparation
Always remove all grease, oil, and other impurities with Maalipesu detergent before grinding. Remove laitance or old peeling paint layers by power grinding, milling, or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot holes removing all loose or brittle material. Open cracks with e.g. an abrasive tool. After mechanical pre-treatment remove all loose material and dust carefully with a vacuum cleaner. The substrate must have a tensile strength above 1.5 MPa. For application on cementitious leveling screed: check compatibility with the leveling screed manufacturer.
Painting Cleaning of tools
Thinner 1029 (or Thinner 1031).
VOC
VOC 2004/42/EC (cat A/j) 500 g/l (2010) Temafloor 310 ESD: max. VOC < 500 g/l
You’re visiting Tikkurila website from United Kingdom. Would you like to visit the local UK site?