Temafloor 4000

A solvent-free Temafloor 4000 troweling screed is prepared by adding sand to Temafloor 400 epoxy varnish mixture.

CE

Temafloor 4000

A solvent-free Temafloor 4000 troweling screed is prepared by adding sand to Temafloor 400 epoxy varnish mixture.

Finish

  • High gloss

Description

A solvent-free Temafloor 4000 troweling screed is prepared by adding sand to Temafloor 400 epoxy varnish mixture.


Product Features

• Due to good impact resistance suitable for e.g. loading platforms, repair shops and market floors. • Recommended also for floors subjected to steam and heat; e.g. in institutional kitchens and dairies. • Withstands heavy wear. Resistance to chemicals is given case by case. • Withstands +110ºC dry heat and +60ºC in immersion.


Recommended Uses

• For new and old concrete floors exposed to heavy mechanical and moderate chemical stress in production facilities, e.g. in wood, chemical and food industries.


Can Sizes

Not applicable


Coverage

For a flat substrate: 1 mm layer: 1 litre ready for use screed/m2 5 mm layer: 5 litres ready for use screed/m2 Practical coverage depends on the evenness of the substrate


Application Conditions

The relative humidity of the concrete should not exceed 97%. The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying. Relative humidity of air should not exceed 80%. Note! There is a natural tendency of this coating to chalk, discolor or yellow unevenly. It is recommended to use polyurethane topcoat when there are high aesthetical requirements on color appearance.


Surface preparation

New concrete: Remove laitance by power grinding, vacuum grit blasting or hydrochloric acid etching. Choose the method best suited for the premises. After grinding remove dust carefully with a vacuum cleaner. Hydrochloric acid etching is carried out with diluted hydrochloric acid (1 part concentrated hydrochloric acid, 4 parts water). Rinse with plenty of water. Dry the floor. Old concrete: Remove all grease, oil, chemicals and other impurities by Maalipesu detergent. Remove old peeling paint layer by grinding, milling or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot-holes removing all loose friable material. Open cracks with e.g. an abrasive tool. Remove loose material and dust. If cementitious screed is used, check compatibility with the levelling screed manufacturer.


Painting

First coat:
By adjustable trowel, serrated trowel, float, levelling trowel and screed box.


Cleaning of tools

Thinner 006 1029.


Why you should choose Temafloor 4000

Durable and safe epoxy screed

Temafloor 4000 developed for new and old concrete floors exposed to heavy mechanical and chemical stresses especially in food or chemical processing facilities. A rough surface of the floor prevents slipping.

Product usp1prof_img
Cheese Production

Excellent resistance to stresses

Temafloor 4000 is a moisture-tolerant screed. It withstands +110ºC dry heat and +60ºC in immersion, and therefore is recommended for floors subjected to steam and heat; e.g. in institutional kitchens, restaurants and dairies.

Product usp2prof_img
Colored sand included creates unique surface

Colors depending on filler

Temafloor 4000 grinding screed prepared by adding colored sand, that gives many alternatives for the aesthetic appearance of the floor.

Product usp3prof_img
Warehousing
has been added to saved.
has been removed from saved.