Temafloor 401

A two-component solvent-free epoxy varnish.

CE

Temafloor 401

A two-component solvent-free epoxy varnish.

Finish

  • High gloss

Description

A two-component solvent-free epoxy varnish.


Product Features

• A low viscosity varnish used as binder in Temafloor 4000 troweling screed.


Can Sizes

10,0 L, 20,0 L, 200,0 L


Coverage

For a flat substrate:1 mm layer: 1 litre ready for use screed / m2 5 mm layer: 5 litres ready for use screed / m2Practical coverage depends on the evenness of the substrate.


Application Conditions

The relative humidity of the concrete should not exceed 97%. The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying. Relative humidity of air should not exceed 80%. Note! There is a natural tendency of this coating to chalk, discolor or yellow unevenly. It is recommended to use polyurethane topcoat when there are high aesthetical requirements on color appearance.


Surface preparation

New concrete: Remove laitance by power grinding, vacuum grit blasting or hydrochloric acid etching. Choose the method best suited for the premises. After grinding remove dust carefully with a vacuum cleaner. Hydrochloric acid etching is carried out with diluted hydrochloric acid (1 part concentrated hydrochloric acid, 4 parts water). Rinse with plenty of water. Dry the floor. Old concrete: Remove all grease, oil, chemicals and other impurities by Maalipesu detergent. Remove old peeling paint layer by grinding or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot-holes removing all loose friable material. Open cracks with e.g. an abrasive tool. Remove loose material and dust.


Painting Cleaning of tools

Thinner 1029.


Why you should choose Temafloor 401

Solvent-free epoxy binder for grinding and ESD screeds

Temafloor 401 is mostly used as a low viscosity binder in Temafloor 4000 grinding screed. Also the varnish can be used as a binder for Temafloor 4000 ESD trowelling screed.

Product usp1prof_img
Food Facilities

Can be used as an injection lacquer

The low viscosity of the lacquer is allowed to spray it on concrete to fill cracks.

Product usp2prof_img
Evens out small cracks in concrete
has been added to saved.
has been removed from saved.