Temafloor 5000M

M1 certified, solvent-free epoxy resin screed. The screed is prepared by adding sand to Temafloor 500M epoxy coating mixture.

M1
  • M1 certified
  • Self-leveling epoxy screed
  • The widest color range on the market

Finish

  • High gloss

Description

M1 certified, solvent-free epoxy resin screed. The screed is prepared by adding sand to Temafloor 500M epoxy coating mixture.


Product Features

• Excellent resistance to abrasion. • Withstands water, oils, greases, chemicals and diluted solutions of non-oxidizing acids, alkali and salt solutions. Resists only temporary splashes of oxidizing acids and bleaching chemicals. Separate chemical resistance table available. • Withstands +70ºC dry heat and +60ºC hot water. Does not resist abrupt, great or repeated changes of temperature. • Self-levelling. Can be used for floors with a max. slope of 5%.


Recommended Uses

• For new and old concrete floors in car parks, garages, business premises, shopping centres, restaurants and cafe`s. Also for floors exposed to heavy mechanical and chemical stress in industrial facilities, warehouses and repair shops; e.g. process or paper machine units, corridors and other floors subjected to high point loadings.


Coverage

For a flat substrate: 1 mm layer: 1 litre ready for use screed / m². 1,7 mm layer: 1,7 litres ready for use screed / m². Practical coverage depends on theevenness of the substrate.


Thinner

Solventfree


Application Conditions

The relative humidity of the concrete should not exceed 97%. Residual moisture content should be below 4 weight-%. The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying. Relative humidity of air should not exceed 80%.


Surface preparation

Always remove all grease, oil, and other impurities with Maalipesu detergent before grinding. Remove laitance or old peeling paint layers by power grinding, milling, or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot holes removing all loose or brittle material. Open cracks with e.g. an abrasive tool. After mechanical pre-treatment remove all loose material and dust carefully with a vacuum cleaner. The substrate must have a tensile strength above 1.5 MPa. For application on cementitious leveling screed: check compatibility with the leveling screed manufacturer.


Painting

First coat:

Adjustable steel trowel followed by spiked roller.


Cleaning of tools

Thinner 006 1029 or 006 1031.


VOC

VOC 2004/42/EC (cat A/j) 500 g/l (2010) Temafloor 5000M: max. VOC < 500 g/l


M1 certified

Temafloor 5000M is prepared by adding sand to M1 certified Temafloor 500M epoxy coating mixture.

Product usp1prof_img
General store

Self-leveling epoxy screed

Temafloor 5000M is self-leveling and it also withstands heavy mechanical and chemical stress in industrial and warehouse facilities.

Product usp2prof_img
Paper factory floor

The widest color range on the market

The wide range of colors are avalible for Temafloor 5000M combined with excellent abrasion resistance.

Product usp3prof_img
Finish in multiple shades
English
Hello!

You’re visiting Tikkurila website from United Kingdom. Would you like to visit the local UK site?

has been added to saved.
has been removed from saved.
en