Temafloor 500M
Full gloss
A two-component, solvent-free epoxy coating. M1 certified.


- M1 certified
- Durable, seamless epoxy coating
- Customizable protection
Finish
-
Full gloss
A two-component, solvent-free epoxy coating. M1 certified.
Product Features
• The M1 classification for low-emitting building materials has been granted by the Finnish Building Information Foundation RTS. • Good resistance to abrasion. • Withstands water, oils, greases, chemicals and dilute solutions of non-oxidizing acids, alkali and salt solutions. Resists only temporary splashes of oxidizing acids and bleaching chemicals. A separate chemical resistance table available. • Withstands +70ºC dry heat and +60ºC in immersion. Does not resist abrupt, great or repeated changes of temperature. • Self-levelling coating.
Recommended Uses
• For new and old concrete floors in car parks, garages, business premises, shopping centres, restaurants and cafe`s. • Also suitable for floorings exposed to heavy mechanical and chemical stress in industrial and storage facilities, repair shops; e.g. process or paper machine units and corridors.
Coverage on concrete floors is on the average: film thickness 0.3 mm coverage approx. 3 m²/litre film thickness 0.5 mm coverage approx. 2 m²/litre Practical coverage depends on the porosity and evenness of the substrate and on the application method.
Thinner
Solventfree
The relative humidity of the concrete should not exceed 97%. Residual moisture content should be below 4 weight-%. The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying. Relative humidity of air should not exceed 80%.
Surface preparation
Always remove all grease, oil, and other impurities with Maalipesu detergent before grinding. Remove laitance or old peeling paint layers by power grinding, milling, or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot holes removing all loose or brittle material. Open cracks with e.g. an abrasive tool. After mechanical pre-treatment remove all loose material and dust carefully with a vacuum cleaner. The substrate must have a tensile strength above 1.5 MPa. For application on cementitious leveling screed: check compatibility with the leveling screed manufacturer.
Painting Cleaning of tools
Thinner 1029 or 1031.
VOC
VOC 2004/42/EC (cat A/j) 500 g/l (2010) Temafloor 500M: max. VOC < 500 g/l
M1 certified
As a low odor, low-VOC product Temafloor 500M contributes to healthier indoor air, improving comfort and well-being. The system has been awarded the M1 emission classification for building materials by the Finnish Building Information Foundation RTS.

Durable, seamless epoxy coating
Temafloor 500M withstands heavy mechanical and chemical stress in industrial, commercial and storage facilities, repair shops, etc. It gives the concrete flooring a smooth, non-porous surface, making cleaning quicker and easier.

Customizable protection
Temafloor 500M can also be tinted to any color to create exactly the right look and feel for the space in question.

You’re visiting Tikkurila website from United Kingdom. Would you like to visit the local UK site?