Temafloor AC501

A two-component, solvent-free low viscosity acrylic binder.

• Used as a binder for Temafloor AC acrylic grinding screed. • Suitable to be used as a self-levelling coating and as a binder of a coloured screed. • Mixed with sand also suitable for patching of concrete floors. • Cures fast also in low temperatures.

• Recommended for the floors of commercial buildings, storages, laboratories, institutional kitchens and food processing industries.

For a flat substrate: 2 mm layer: 2 litres ready to use screed / m² and 6 mm layer: 6 litres ready to use screed / m². Practical coverage depends on the evenness of the substrate.

Solventfree

The relative humidity of the concrete should not exceed 97%. Residual moisture content should be below 4 weight-%. The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying. Relative humidity of air should not exceed 80%.

Always remove all grease, oil, and other impurities with Maalipesu detergent before grinding. Remove laitance or old peeling paint layers by power grinding, milling, or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot holes removing all loose or brittle material. Open cracks with e.g. an abrasive tool. After mechanical pre-treatment remove all loose material and dust carefully with a vacuum cleaner. The substrate must have a tensile strength above 1.5 MPa. For application on cementitious leveling screed: check compatibility with the leveling screed manufacturer.

Thinner 006 1400.

VOC 2004/42/EC (cat A/j), 500 g/l (2010) Temafloor AC 501: max. VOC < 500 g/l.