Temafloor AC502

A two-component, solvent-free, elastic acrylic binder.

CE

Temafloor AC502

A two-component, solvent-free, elastic acrylic binder.

Finish

  • Semi-matt

Description

A two-component, solvent-free, elastic acrylic binder.


Product Features

• Used as a binder for Temafloor AC acrylic troweling screed. • Suitable to be used as a self-levelling coating and as a binder of a coloured sand screed. • Suitable also for indoor asphalt floors. • Mixed with sand also suitable for patching of concrete floors. • Cures fast also in low temperatures.


Recommended Uses

• Recommended for the floors of engineering workshops, warehouses, cold stores of food industry parking deck surfaces, loading ramps and terraces.


Can Sizes

20,0 L, 200,0 L


Coverage

For a flat substrate: 2 mm layer: 2 litres ready to use screed / m² and 6 mm layer: 6 litres ready to use screed / m². Practical coverage depends on the evenness of the substrate.


Application Conditions

The relative humidity of the concrete should not exceed 97%. The temperature of the ambient air, surface or coating should not fall below +5ºC during application or drying. Relative humidity of air should not exceed 80%.


Surface preparation

New concrete: Remove laitance by power grinding, vacuum grit blasting or hydrochloric acid etching. Choose the method best suited for the premises. After grinding remove dust carefully with a vacuum cleaner. Hydrochloric acid etching is carried out with diluted hydrochloric acid (1 part concentrated hydrochloric acid, 4 parts water). Rinse with plenty of water. Dry the floor. Old concrete: Remove all grease, oil, chemicals and other impurities by Maalipesu detergent. Remove old peeling paint layer by grinding, milling or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot-holes removing all loose friable material. Open cracks with e.g. an abrasive tool. Remove loose material and dust.


Painting Cleaning of tools

Thinner 006 1400.


VOC


VOC 2004/42/EC (CatA/{Phrase6_Key1}) {Phrase6_Key2} g/l (2010).The VOC amount is < {Phrase6_Key3} g/l.

Why you should choose Temafloor AC502

Quick and cost-effective product

Due to its hardening mechanism, the floor dries quickly and can be loaded as soon as two hours after coating. Thanks to their drying speed, the Temafloor AC coating systems are particularly suitable for premises where the available working time is limited, such as at industrial production facilities. All Temafloor AC products can be applied in low temperatures.

Product usp1prof_img
Stadium
has been added to saved.
has been removed from saved.