Temafloor AC601 Clear

A two-component, solvent-free acrylic topcoat.

• Used as a topcoat for Temafloor AC501 and Temafloor AC509 acrylic troweling screeds. • Builds up hard and durable surface. • Non-yellowing. • Rapid curing also in low temperatures.

• Recommended for the floors of commercial buildings, warehouses, laboratories, and food processing industries.

Coverage is on the average: topcoat 1.2–3.3 m²/l. Practical coverage depends on the porosity and evenness of the surface and on the application method.

Solventfree

The relative humidity of the concrete should not exceed 97%. Residual moisture content should be below 4 weight-%. The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying. Relative humidity of air should not exceed 80%.

Always remove all grease, oil, and other impurities with Maalipesu detergent before grinding. Remove laitance or old peeling paint layers by power grinding, milling, or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot holes removing all loose or brittle material. Open cracks with e.g. an abrasive tool. After mechanical pre-treatment remove all loose material and dust carefully with a vacuum cleaner. The substrate must have a tensile strength above 1.5 MPa. For application on cementitious leveling screed: check compatibility with the leveling screed manufacturer.

Thinner 006 1400

VOC 2004/42/EC (cat A/j), 500 g/l (2010) Temafloor AC601 Clear: max. VOC < 500 g/l