Temafloor AC602 Clear

A two-component, solvent-free acrylic topcoat.

• Used as a topcoat for Temafloor AC502 acrylic troweling screed. • Forms elastic and durable surface. • Non-yellowing. • Cures at low temperatures.

• Recommended for the floors of engineering workshops, warehouses, cold stores of food industry, parking deck surfaces, loading ramps and terraces.

Coverage is on the average: topcoat 1.3–2.5 m²/l. Practical coverage depends on the porosity and evenness of the surface and on the application method.

Solventborne

The relative humidity of the concrete should not exceed 97%. Residual moisture content should be below 4 weight-%. The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying. Relative humidity of air should not exceed 80%.

Always remove all grease, oil, and other impurities with Maalipesu detergent before grinding. Remove laitance or old peeling paint layers by power grinding, milling, or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot holes removing all loose or brittle material. Open cracks with e.g. an abrasive tool. After mechanical pre-treatment remove all loose material and dust carefully with a vacuum cleaner. The substrate must have a tensile strength above 1.5 MPa. For application on cementitious leveling screed: check compatibility with the leveling screed manufacturer.

Thinner 006 1400.

VOC 2004/42/EC (cat A/j), 500 g/l (2010) Temafloor AC602 Clear: max. VOC < 500 g/l