Temafloor AC609 Clear

A two-component, solvent-free acrylic topcoat.


Temafloor AC609 Clear

A two-component, solvent-free acrylic topcoat.


  • Gloss


A two-component, solvent-free acrylic topcoat.

Product Features

• Used as a topcoat for Temafloor AC509 and Temafloor AC501 acrylic troweling screeds. • Not suitable for topcoating of Temafloor AC502 troweling screed. • Resistant to hot water and grease up till +80ºC. • Rapid curing also in low temperatures.

Recommended Uses

• Suitable for wet premises, especially for the food processing industry.


Coverage is on the average: topcoat 1.3–2.5 m²/l. Practical coverage depends on the porosity and evenness of the surface and on the application method.

Application Conditions

The relative humidity of the concrete should not exceed 97%. The temperature of the ambient air, surface or coating should not fall below +5ºC during application or drying. Relative humidity of air should not exceed 80%.

Surface preparation

New concrete: Remove laitance by power grinding, vacuum grit blasting or hydrochloric acid etching. Choose the method best suited for the premises. After grinding remove dust carefully with a vacuum cleaner. Hydrochloric acid etching is carried out with diluted hydrochloric acid (1 part concentrated hydrochloric acid, 4 parts water). Rinse with plenty of water. Dry the floor. Old concrete: Remove all grease, oil, chemicals and other impurities by Maalipesu detergent. Remove old peeling paint layer by grinding, milling or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot-holes removing all loose friable material. Open cracks with e.g. an abrasive tool. Remove loose material and dust.

Painting Cleaning of tools

Thinner 006 1400.


VOC 2004/42/EC (cat A/j), 500 g/l (2010) Temafloor AC609 Clear: max. VOC < 500 g/l

Quick and cost-effective product

Due to its hardening mechanism, the floor dries quickly and can be loaded as soon as two hours after coating. Thanks to their drying speed, the Temafloor AC coating systems are particularly suitable for premises where the available working time is limited, such as at industrial production facilities. All Temafloor AC products can be applied in low temperatures.

Product usp1prof_img
has been added to saved.
has been removed from saved.