Temafloor AC610 Clear

A two-component, solvent-free acrylic topcoat.

• Suitable for topcoating of Temafloor AC509 and Temafloor AC501 acrylic screeds. • Especially for hard mechanical abrasion in dry interior premises. • Excellent resistance to abrasion and scratches. • Good resistance to chemicals.

• Suitable for dry indoor premises, such as corridors, retail stores, changing rooms etc.

Coverage is on the average: topcoat 1.5–3.3 m²/l. Practical coverage depends on the porosity and evenness of the surface and on the application method.

Solventfree

The relative humidity of the concrete should not exceed 97%. Residual moisture content should be below 4 weight-%. The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying. Relative humidity of air should not exceed 80%.

Always remove all grease, oil, and other impurities with Maalipesu detergent before grinding. Remove laitance or old peeling paint layers by power grinding, milling, or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot holes removing all loose or brittle material. Open cracks with e.g. an abrasive tool. After mechanical pre-treatment remove all loose material and dust carefully with a vacuum cleaner. The substrate must have a tensile strength above 1.5 MPa. For application on cementitious leveling screed: check compatibility with the leveling screed manufacturer.

Thinner 006 1400 or Temafloor AC Clean.

VOC 2004/42/EC (cat A/j), 500 g/l (2010). Temafloor AC609 Clear: max. VOC < 500 g/l.